CB--300S Servo Motor automatic packing machine
feeding products: can install the feeder automatically feeding or feeding by manual
Conveying products:conveying by pusher or belt according to different products
Deliver film:crossover the film and runs smoothly
Date printing:our regular printer is ink roll printer. Thermal transfer printer is available.
Tracking mark:tracking the color mark on film and cut the correct bag length
Bag forming:adjust the bag former to fit for the size of products
Center seal:clamping and heating the center seal
Cutting and sealing:can make a round hole or euro hole when cutting and sealing
Nitrogen injection:inject the nitrogen for bread
Exit convey:exit the finished products
Mechanical key parts are made of stainless steel to meet the heath standards of food QS and medicine GMP
Human, intelligent parameter settings, the general staff in a short time can skilled use. operation, maintenance and repair easier and convenient.
Saving time and film when replacing products. Can save 10 groups of parameters formula. directly switch to normal production. No need to re-adjust again, which reduce the waste of material and simplify the adjustment process.
Intelligent control of the temperature module, much stable temperature control, set the parameters directly on the touch screen.
No need to adjust the cutting speed. the servo motor motion controller automatically tracking synchronization.
Write the material position data on the touch screen. its automatically correct the position. No need to adjust it by manual
Mature servo control technology with overload protection, leakage protection, fault alarm and other safety devices to protect the safety and serve the life of the packing machine
Three-Axis power transmission structure, simplifying the mechanical transmission structure, the digital control, which more than dual frequency motor packing machine. low-carbon, energy saving and environment protection.
Three-Axis packing machines extended their packing scope to the production lines,which increase the capacity of the whole line. easy and simple to connect with other equipment.
Applicable for the chocolate, pies, bread, instant noodles. moon cakes, industrial parts. biscuits, box, hardware, plastic, etc.
Technology specification:
Film width | ≤350mm |
Thickness of film |
40-100um |
Diameter of roll film |
Outer diameter≤300mm,inner diameter≤75mm |
Single knife |
Bag size:(50-1500)×(50-160)×(3-60)mm |
speed:5-150(bags/min) | |
Double knife |
Bag size:(50-1500)×(50-160)×(3-60)mm |
Power requirement |
220V,60hz,3KW |
Dimension |
3800×940×1500mm, (L×W×H) |
Weight |
580kg |
We are so powerful compare with dual frequency motor packing machine
|
|
|
|
Difference |
Dual frequency motor machine |
Three-Axis servo motor machine |
Remarks |
power |
2 normal motors,one for horizontal cutter and conveying products,another for center seal |
Horizontal seal, center seal and conveying products controller by 3 independent servo motors |
|
Machine structure |
Need to adjust the speed of cutting,deliver products |
Driving by servo motor directly |
Structure simple,Reduce,the mechanical friction,Easy maintenance,long life time |
Horizontal cutting speed adjustment |
Use CAM structure to adjust the synchronization of cutting and film delivery by manual |
No need to adjust the cutting.use motion controlling for synchronization automatically |
|
Material position |
Adjust it by differential structure by manual |
Input the correct material position value on the touch screen |
Save time |
Prevent cutting products |
When cutting products,need stop machine and reset by manual |
When cutting products,the cutting stop,the center sealing and delivering products continue. |
Save the stopping time |
Empty bag prevention |
without this function |
No products coming,the center seal and horizontal seal stop until the products coming |
No waste film |
Change the product length |
When the length of products too much difference,need to change the mechanical parts,complex operation |
Simple operation,just input the bag length on the touch screen |
|
Formula |
No this function |
Can save a lot of formulas. |
Save time for adjustment |
Training for workers |
Need a long time to be familiar with machine |
Smart technology,be familiar with machine in a short time |
|
Ink printer parameter:
Print Area | Axial: 31mm Radial:45.5mm |
Max. Line |
T-thpe:13lines Max. character 20/line R-type:9lines Max. character 13/line |
Type |
T-type:1.5, 2.0, 2.5, 3.0mm(w)*3.5mm(H) R-type:3.5mm(w)*3.5, 4.5, 5.5mm(H) |
Cycle Rate | Up to 300 cycles / minute; Surface Speed Up to 50 meters / minute |
Min. Print space | 70mm for 2 set type; (select one): 35mm for 4 set type |
Type Rotation Direction | Clockwise (Fixed); (select one)Counter clockwise (fixed) |
Ink Roll | 36*32mm |
Electrical | 220V 10% / 50Hz / 1PH 100W T 2.0AF use |
Temperatures | Minimum 4 (40 F) Maximum 38 (100 F) |
Weight | Print Head: 2.0kg Control Box: 1.0kg |
Dimension |
Print Head:14mm*140mm*100mm(L*W*H) Control box:180mm*160mm*125mm(L*W*H) |
Relative Humidity | Minimum 10% Maximum 95% (non-condensing) |
Advantage:
1.Machine frame in simple design with strong stainless steel and carbon steel
2.The surface is smooth, flat and brushed
3.The tail frame is integrated that making the film moves smoothly
4.The connection edges are full of welding, looking so strong and beautiful
Welcome you visit our company!